Spas

Spas

SP62

Documents

Spec Sheet
Specifications  
Seats 7
Dimensions 90″ * 90″ * 36″
Water Capacity 1600L
Dry Weight / Full Weight 1014 lb. / 4541 lb.
Jets 62
Required power 60 AMP
Pumps 2 x 1800W™
Circulatoion Pump 1 x 350W
Heater 5.5 kW
Timber Free Frame Yes
Filtration System Purezone™
12 899.00$

SP62

Spa (7 seats)

The ultimate spa experience!

Due to its generous size, the SP62 is the ultimate in a large capacity hydrotherapy spa. Its 7 generous seats makes the SP62 an entertainer’s dream, whilst the two virtual recliners and 62 jets put it at the pinnacle of hydrotherapy capability. 

Each seat provides a unique massage. Find your favourite or move around to experience them all. The choice is yours.

Spa features

Molded ABS/fiberglass base

The base is made as one piece to ensure it is strong enough to take the weight of the spa, water and people. It prevents vermin from getting inside the workings of your spa and is virtually indestructible to ensure years of trouble free usage.

Toughflex plumbing

The plumbing on a spa is essential to water cleanliness and hydrotherapy. To ensure years of hassle free usage we have used tough yet flexible pipes that remain kink free. As we say, it's what's underneath that truly matters.

Timber free frame

We build your base, cabinet and shell out of permanent materials, so it only makes sense that our frames should also be constructed from rot free products. Our timber free frames give you added surety that your precious investment will last many years.

Thermotough cabinet

We craft our cabinets out of a plastic and wood composite to ensure UV protection even in the harshest environments. No-body like needless maintainece which is why we have created our own range of paint and stain free cabinets for years of enjoyment with out the grind.

Four layer shell construction

Replacing a spa shell is a very expensive process so we go to extreme lengths to ensure our shells are made to last for a minimum of 10 years. Our shell construction consists of 4 unique layers bonded together for a smooth yet rigid watertight finish. And that's because you can't have a spa without any water!

Aristech Acrylic

Acrylic needs to be able to handle the extremes and last the life of your spa. That is why we use American made acrylic that is the best available anywhere.

Perimeter insulation

We insluate the perimeter to capture the energy created by the pumps, heater, controllers, and lights. This captured energy is then reused to keep the pipes warm and reduce the water heat loss that would usually occur.

Dual layer insulation

We not only insulate the perimeter, but we also insulate the shell to increase the thermal mass closest to the water. Preventing heat loss from the shell in the first place is the most efficient and cost effective way to keep your spa water warm.

Specifications  
Seats 7
Dimensions 90″ * 90″ * 36″
Water Capacity 1600L
Dry Weight / Full Weight 1014 lb. / 4541 lb.
Jets 62
Required power 60 AMP
Pumps 2 x 1800W™
Circulatoion Pump 1 x 350W
Heater 5.5 kW
Timber Free Frame Yes
Filtration System Purezone™

SEVERAL SPAS
TO TRY IN STORE

Come and try our spas at one of our two branches and find what you are looking for! When you buy a car, you take a test drive, so why would it be any different for a spa?

Get an appointment
SEVERAL SPAS<br/> TO TRY IN STORE